Compx-elock Network Fridge Manual do Utilizador descarregar pdf (Página 11)

Manual Programming Guide continued

Set Beep Volume

Using SET BEEP VOLUME, the audible beep can be

adjusted.

1. Press “MENU.” LOGIN PLEASE will be displayed.

2. Scan valid credential or enter 4-14 digit PIN and press

“ENTER.”

3. Press “DOWN” button to highlight SET BEEP VOLUME and

press “NEXT/SELECT.”

4. Beep Volume will be displayed.

5. Enter 0 - 9 on numeric keypad or +/- buttons to adjust.

(“0” = MUTE)

6. Press “NEXT/SELECT” when done.

7. Press “BACK/CANCEL” to return to main menu.

Reset Net Schedule

A PROPERLY CONFIGURED AND ENABLED NETWORK eLock

IS REQUIRED TO MAKE USE OF THIS FEATURE.

Only Supervisors are allowed to RESET NET SCHED.

Using RESET NET SCHED. the scheduled network check-in

time can be set.

1. Press “MENU.” LOGIN PLEASE will be displayed.

2. Scan valid credential or enter 4-14 digit PIN and Press

“ENTER.”

3. Press “DOWN” button to highlight RESET NET SCHED. and

press “NEXT/SELECT.”

4. NETWORK TIMING RESET will be displayed. The eLock will

follow the programmed or default check-in frequency from

this time of day forward.

For example:

Programmed Update Interval as set in LockView is 12 hours

(twice/day). The time of day was 10 a.m. when the eLock

was initialized.

Therefore, the eLock update time is 10 a.m. and 10 p.m. The

desired update time is 6 a.m. and 6 p.m.

Using the RESET NET SCHED. feature, the above steps should

be followed at 6 a.m. or 6 p.m.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Sem comentários

Compx-elock Network Fridge Manual do Utilizador Página 11